[/vc_column_text][/vc_column][/vc_row]
Known pattern errata for designs published prior to 2018 is listed below.
Allium
versions prior to 12.10.13:
Under “Directions”, for Row 3: omit “slide sts to opposite end of ndl”.
Basil Blanket
digital prior to 2.27.14, printed versions of KW: Baby Collection:
Edging section, under “Work Hem”:
Rnd 1: *K1, k2tog, knit to 3 sts before m, skp, k1; rep from * to end – 8 sts dec’d.
Cadillac Mountain
digital and printed copies shipped prior to 4.14.16):
On p.3 for the Right Front armhole decreases, in the “All Sizes” section, the RS/WS rows should be switched as follows:
Row 1 (WS, Dec): P2, ssp, p to end – 1 st dec’d.
Row 2 (RS, Dec): K to 4 sts rem, ssk, k2 – 1 st dec’d.”
At the end of the same paragraph, there is 5 sts dec’d for the smallest size, not 6. / On p.3 for the Left Front armhole decreases, the location of the decreases needs to be shifted to the opposite end of the row:
Row 1 (RS, Dec): K2, ssk, k to end – 1 st dec’d.
Row 2 (WS, Dec): P to 4 sts rem, ssp, p2 – 1 st dec’d.
Next Row (Dec): K2, ssk, k to end – 1 st dec’d.
Dovenby Cape
digital and printed prior to 9.1.15:
Under Yoke, right before working Body: Change to larger needles.
Florence Cap
digital prior to 12.8.13, printed versions of KW: Baby Collection:
The pattern repeat lines were left off of the Lace Chart. The pattern repeat is 3 sts from either side of the chart (the center 11 sts).
Fuller Farm
digital prior to 5.8.14, printed versions of Weekenders Booklet:
Rnd 2 of the crown decreases should read as follows:
Rnd 2: *C3RP, C3LP, C2R; rep from * around.
Give A Hoot
digital prior to 12.12.13, printed versions from Volume 1:
Under “Decrease for Top”, there is a decrease round missing:
Rnd 45: SSK, k4, k2tog, SSK, k4, k2tog – 12 sts.
Rnd 46: SSK, k2, k2tog, SSK, k2, k2tog – 8 sts.
Rnd 47: SSK, k2tog, SSK, k2tog – 4 sts.
digital versions prior to 12.12.13 only:
C4Fp: Sl 2 sts to cn, hold front, p2, k2 sts from cn.
Gertrude
digital prior to 3.11.14, current printed patterns:
Some of the given knitting lengths in the “Right Front / Sleeve” section are incorrect. Please follow the lengths as given in the “Left Front / Sleeve” section.
Gillam
current printed patterns, digital prior to 8.27.14:
The Tuck in the abbreviations should be written as a 3 round pattern as follows: Rnds 1-2: Purl.
Rnd 3: Place RH ndl from back to front into st 2 rnds below, p1, slipping sts off ndl.
On the Tuck and Cable chart, Rnd 1 should not be labeled as a RS row. When working back and forth, it is a WS row.
Additionally, for clarification, the following note has been added: “When working the cable and tuck pattern back and forth after the division, on WS rows work the tuck as follows: place RH ndl from front to back into st 2 rnds below, k1, slipping sts off ndl.”
Hawkes
digital prior to 8.27.14, current printed patterns:
For Sleeves, after beginning short rows:
Row 2 (WS): P to 1st marker, remove m, p7 (8, 9, 9, 10, 11), w+t.
Increase for Ribbing: Rnd 1: [K24 (27, 14, 16, 17, 19), M1L] 2 (2, 2, 4, 2, 4) times, then [k -( -, 15, -, 18, -) M1L] – (-, 2, -, 2, -) times – 50 (56, 62, 68, 74, 80) sts.
Honey Hollow
digital prior to 7.23.14:
Row 4: K2, p3, k2, slipping m as you come to them.
Jordan Pond
digital and printed prior to 3.30.16:
Rows 4 and 6 on the I-Cord Ribbing should read as follows:
Sl3 wyif, k2, *p2, k2; rep from * to 3 sts rem, p3.
Rows 4 and 6 on the attached I-Cord should read as follows:
Sl 3 wyif, work in patt to 3 sts rem, p3.
Row 1 should end “k3”, not “p3”.
Maeve
digital and printed prior to 8.28.14:
Working L to R, Row 28 (WS) of Cable Panel Chart A should end: P2, k1, P2…
Mackenzie River
digital and printed prior to 10.27.17
Lace section should have you repeat lace portion 10 times around (not 8).
Mildred
digital prior to 2.18.14, printed KW: Baby Collection:
At the end of “Right Front”, you should end your knitting after working a RS row so the working yarn is at the armhole edge of the piece.
Stone Point
digital prior to 3.2.17, printed patterns:
Written instructions only of the Flame Chevron Lace (the chart is correct):
Row 21: K5, * yo, k1, k2tog, k4; rep from * to end, ending final repeat with a k3.
Row 23: K6, * yo, k2tog, k5; rep from * to end, ending final repeat with a k3.
Swilly
digital and current printed patterns:
KEY: K on RS, P on WS; P on RS, K on WS.
Tallin
digital prior to 12.16.13, printed versions prior to 2.2014:
Some issues to the chart occurred when the pattern was reformatted in Fall 2013. A new, updated chart was put up in December. If you are a stockist with hard copy patterns, please email us and we will send you a chart addendum.
Tilly
digital and printed prior to 8.28.14:
The decreases on Round 17 of chart B should not be there.
There is a symbol is missing from the chart key: the box with a “V” is a make one increase.
TOP CUFF:
Rnds 1+2: P all sts.
Rnds 3+4: K all sts.
Rnds 5-7: P all sts. Change to smaller ndls.
Rnd 8: *K1, p1; rep from * around. Work in ribbing a set for 2: (5 cm).
BO all sts in patt loosely.
Umbrel
digital prior to 12.09.13, current printed patterns:
Some issues with the chart occurred when the pattern was slightly reformatted for re-printing in Fall 2013. A new updated chart was put up in December 2013. A chart addendum is available; please contact us for more information.
Ursa
digital prior to 12.30.13, current printed patterns:
Knitting Diagram:
A: Knitting Direction L to R.
B: Located on the top right.
C: Located on top left.
D: Located on bottom left.
E: Located on bottom right.
Vera
digital only prior to 2.11.16:
The body length was originally incorrectly listed as 21″ (53.5 cm). The correct length is 16″ (40.5 cm).
There is a Twisted Rib pattern given in the specifications, but it should not be there as there is no twisted rib in the pattern.
Vesa
digital prior to 9.8.15, current printed patterns:
On p.3, in the Bottom Border Transition Row, for the small size only, the row should end with a “p2“, not a “p1” as written.