Although all of our patterns are carefully tech edited, test knit, and copy edited, mistakes do sometimes slip through. We are as frustrated by mistakes as you are and make every effort to update both digital (.pdf) and hard copies of the patterns as quickly as possible. If you believe you have found an error in one of our patterns, please contact us and we will do our best to remedy the situation as soon as we are able. Known pattern errata is listed below in alphabetical order.
ALLIUM • (versions prior to 12.10.13): Under "Directions", for Row 3: omit "slide sts to opposite end of ndl".
BASIL BLANKET • (digital prior to 2.27.14, current printed versions of KW: Baby Collection): Edging section, under "Work Hem": Rnd 1: *K1, k2tog, knit to 3 sts before m, skp, k1; rep from * to end - 8 sts dec'd.
CADILLAC MOUNTAIN • (digital and printed copies shipped prior to 4.14.16): On p.3 for the Right Front armhole decreases, in the "All Sizes" section, the RS/WS rows should be switched as follows: Row 1 (WS, Dec): P2, ssp, p to end - 1 st dec’d. Row 2 (RS, Dec): K to 4 sts rem, ssk, k2 - 1 st dec’d." At the end of the same paragraph, there is 5 sts dec'd for the smallest size, not 6. / On p.3 for the Left Front armhole decreases, the location of the decreases needs to be shifted to the opposite end of the row: "Row 1 (RS, Dec): K2, ssk, k to end - 1 st dec’d. Row 2 (WS, Dec): P to 4 sts rem, ssp, p2 - 1 st dec’d, and "Next Row (Dec): K2, ssk, k to end - 1 st dec’d."
DOVENBY CAPE • (digital and printed prior to 9.1.15): Under Yoke, right before working Body: Change to larger needles.
FLORENCE CAP • (digital prior to 12.8.13, current printed versions of KW: Baby Collection): The pattern repeat lines were left off of the Lace Chart. The pattern repeat is 3 sts from either side of the chart (the center 11 sts).
FULLER FARM • (digital prior to 5.8.14, current printed versions of Weekenders Booklet): Rnd 2 of the crown decreases should read as follows: Rnd 2: *C3RP, C3LP, C2R; rep from * around.
GIVE A HOOT • (digital prior to 12.12.13, current printed versions from Volume 1): Under "Decrease for Top", there is a decrease round missing: Rnd 45: SSK, k4, k2tog, SSK, k4, k2tog - 12 sts. Rnd 46: SSK, k2, k2tog, SSK, k2, k2tog - 8 sts. Rnd 47: SSK, k2tog, SSK, k2tog - 4 sts. • (digital versions prior to 12.12.13 only): C4Fp: Sl 2 sts to cn, hold front, p2, k2 sts from cn.
GERTRUDE • (digital prior to 3.11.14, current printed patterns): Some of the given knitting lengths in the "Right Front / Sleeve" section are incorrect. Please follow the lengths as given in the "Left Front / Sleeve" section.
GILLAM • (current printed patterns, digital prior to 8.27.14): The Tuck in the abbreviations should be written as a 3 round pattern as follows: "Rnds 1-2: Purl. Rnd 3: Place RH ndl from back to front into st 2 rnds below, p1, slipping sts off ndl." On the Tuck + Cable chart, Rnd 1 should not be labeled as a RS row. When working back and forth, it is a WS row. Additionally, for clarification, the following note has been added: "When working the cable and tuck pattern back and forth after the division, on WS rows work the tuck as follows: place RH ndl from front to back into st 2 rnds below, k1, slipping sts off ndl."
GREENROW • (Sample It pattern only): On the chart key, the C2RP, C2LP, C2R, C2L should all be twisted, so follow the abbreviations for C2RPT, C2LPT, C2RT, C2LT. The 10th stitch in from the right on Round 13 should be a purl, not a knit.
HAWKES • (digital prior to 8.27.14, current printed patterns): For Sleeves, after beginning short rows: Row 2 (WS): P to 1st marker, remove m, p7 (8, 9, 9, 10, 11), w+t. and Increase for Ribbing: Rnd 1: [K24 (27, 14, 16, 17, 19), M1L] 2 (2, 2, 4, 2, 4) times, then [k -( -, 15, -, 18, -) M1L] - (-, 2, -, 2, -) times – 50 (56, 62, 68, 74, 80) sts.
HONEY HOLLOW • (digital prior to 7.23.14): Row 4: K2, p3, k2, slipping m as you come to them.
JORDAN POND • (digital and printed prior to 3.30.16): Rows 4 and 6 on the I-Cord Ribbing should read as follows: Sl3 wyif, k2, *p2, k2; rep from * to 3 sts rem, p3. Rows 4 and 6 on the attached I-Cord should read as follows: Sl 3 wyif, work in patt to 3 sts rem, p3, and Row 1 should end "k3", not "p3".
MAEVE • (digital and printed prior to 8.28.14): Working L to R, Row 28 (WS) of Cable Panel Chart A should end: P2, k1, P2...
MILDRED • (digital prior to 2.18.14, current printed KW: Baby Collection): At the end of "Right Front", you should end your knitting after working a RS row so the working yarn is at the armhole edge of the piece.
STONE POINT • (digital prior to 3.2.17, printed patterns): Written instructions only of the Flame Chevron Lace (the chart is correct): Row 21: K5, * yo, k1, k2tog, k4; rep from * to end, ending final repeat with a k3. Row 23: K6, * yo, k2tog, k5; rep from * to end, ending final repeat with a k3.
SWILLY • (digital and current printed patterns): KEY: K on RS, P on WS; P on RS, K on WS.
TALLIN • (digital prior to 12.16.13, printed versions prior to 2.2014): Some issues to the chart occurred when the pattern was reformatted in Fall 2013. A new, updated chart was put up in December. If you are a stockist with hard copy patterns, please email us and we will send you a chart addendum.
TILLY • (digital and printed prior to 8.28.14): The decreases on Round 17 of chart B should not be there. There is a symbol is missing from the chart key: the box with a "V" is a make one increase. TOP CUFF: Rnds 1+2: P all sts. Rnds 3+4: K all sts. Rnds 5-7: P all sts. Change to smaller ndls. Rnd 8: *K1, p1; rep from * around. Work in ribbing a set for 2: (5 cm). BO all sts in patt loosely.
UMBREL • (digital prior to 12.09.13, current printed patterns): Some issues with the chart occurred when the pattern was slightly reformatted for re-printing in Fall 2013. A new updated chart was put up in December. If you are a stockist with hard copy patterns, please email us and we will send you a chart addendum.
URSA • (digital prior to 12.30.13, current printed patterns): Knitting Diagram: A: Knitting Direction L to R. B: Located on the top right. C: Located on top left. D: Located on bottom left. E: Located on bottom right.
VERA • (digital only prior to 2.11.16): The body length was originally incorrectly listed as 21" (53.5 cm). The correct length is 16" (40.5 cm). There is a Twisted Rib pattern given in the specifications, but it should not be there as there is no twisted rib in the pattern.
VESA • (digital prior to 9.8.15, current printed patterns): On p.3, in the Bottom Border Transition Row, for the small size only, the row should end with a "p2", not a "p1" as written.